browser icon
You are using an insecure version of your web browser. Please update your browser!
Using an outdated browser makes your computer unsafe. For a safer, faster, more enjoyable user experience, please update your browser today or try a newer browser.

Workshop Addition

The building of my new workshop

Hacking the Delta 50-875

(This post is based on a LumberJocks.com forum thread.) After completing my dust collection system installation, I turned to my air cleaner, the Delta 50-875. I had decided to install it just above my table saw — about 2/3rd’s of the way along the wall, where the intake would be in line with the front … Continue reading »

Categories: Workshop Addition | Tags: , , , , | Leave a comment

Custom Collector Controller

If you read my last post you might recall how I decided to purchase an X10 “Powerflash Interface” to test out as a controller for my dust collector. My skepticism about how the unit worked turned out to be well-founded. The Powerflash device sends an X10 “on” signal when 6-18VDC is applied to the contacts … Continue reading »

Categories: Workshop Addition | Tags: , , , , , | 4 Comments

A Short But Productive Weekend

Countertops I’ve been dying to start stowing my tools away in the newly built shop cabinets — getting them both organized and out of the garage where they’re making it difficult to keep the car. The last remaining obstacle is finishing the countertops. Not that I couldn’t finish them with the drawers full…but some time … Continue reading »

Categories: Workshop Addition | Tags: , , , , , , | Leave a comment

The Monster in My Closet

OK, so maybe not exactly a “monster,” but the old Woodtek 3HP double-bag dust collector I bought sure does sound like one…and appears to live up to its 2100CFM (free-air) rating. I’ve finally finished the main duct work runs and over the weekend I cut the hole from the shop into the external “dust collection … Continue reading »

Categories: Workshop Addition | Tags: , , , | Leave a comment

My “Green” Dust Collection System

Not “green” in the environmental sense, mind you…but green in a very literal sense. I’ve spent literally months planning out most of the details of my new shop, since before they broke ground. One of the features I was most anxious to include that I was unable to have in my shared garage space was … Continue reading »

Categories: Workshop Addition | Tags: , , | 1 Comment

Setting Up Shop II, or How I Spent My Winter Vacation

I’m not what you would call a “neat freak.” However, I do try to keep things generally organized and find it near impossible to work in a cluttered shop. Not only do I find it technically difficult to work in an unorganized mess – I find it hopelessly depressing as well. Consequently, when the shop … Continue reading »

Categories: Workshop Addition | Tags: , | Leave a comment

Happy Thanksgiving!

Over the long holiday weekend I only managed to sneak in roughly a day and a half of work on the shop. Between Friday afternoon and Saturday I secured the base cabinets, assembled the “floating” top for the DeWalt 706 miter saw, and built the three countertops. Not too bad considering the time.

Categories: Remodeling, Woodworking, Workshop Addition | Tags: | Leave a comment

Two-maybe three-Degrees of Separation

Over the years I’ve made many bone-headed mistakes. Cut a piece too short because I “knew” the measure and didn’t feel the need to consult the drawings I spent hours preparing. Put a dado at the wrong height, the wrong length, or worse, the wrong side! Glue a part on backwards. I’m not quite old … Continue reading »

Categories: Workshop Addition | Tags: , , , , | Leave a comment

Setting Up Shop

This weekend marked the beginning of the “load in” process. With Grandma and Grandpa in for the weekend, the kids were well occupied and I had the time to finally start to finish the shop addition. On Friday evening I finished the loft underside — and did my typical lousy job of taping/plastering the seams. … Continue reading »

Categories: Workshop Addition | Tags: , , , | Leave a comment

Lofty Ambitions…

OK, so the inspections went well — though it took 3 visits from the inspector. Mostly little stuff — but Jay promptly dealt with all of the issues and we finally made it.I’m now working on getting the shop “in shape” before moving all of the tools in. This includes building a 4′ x 14′ … Continue reading »

Categories: Woodworking, Workshop Addition | Tags: , , , , | Leave a comment